Skippy" pile driver with air-cooled 4-stroke petrol engine
The "Skippy" pile driver is a powerful and modern tool for quickly and easily driving wooden, metal and concrete piles up to a diameter of 120 mm. It enables professional work on construction sites, in agriculture, in event technology and many other applications.
The modern design, ergonomic construction and vibration-damped handles take the strain off the operator.
All of the machine's controls are integrated into the combination switch in the operating handle, which makes handling easier and operation intuitive.
The ram's drive motor with an output of 1 kW / 1.36 hp generates a powerful impact energy of up to 55 joules at a maximum impact frequency of 1350 blows per minute. The engine is easy to start using a cable pull. The large fuel tank and low fuel consumption allow the machine to be used for longer periods without refuelling.
The built-in four-stroke engine offers various advantages over the frequently used two-stroke engines: quieter and low-emission operation as well as a longer service life and lower maintenance requirements.
The cast aluminium gear housing and the robust engine ensure the stability and durability of the machine.
The accessories and tools supplied as well as the operating instructions ensure that you can use the pile driver safely and without any problems. The guarantee and service from Kernlochbohrer GmbH ensure that you will be able to enjoy the machine for a long time.
Note on commissioning:
The machine is delivered from Kernlochbohrer GmbH filled with engine oil. Before starting the engine for the first time, the engine oil level must be checked as a precaution!
Instructions for driving piles with a pile driver:
Different soil conditions can influence the driving process and the stability of the driven piles. Here are some important aspects to consider:
Soil type:
The influence of the soil type on the driving process is considerable. Loamy soils have a higher resistance, while sandy soils are generally less resistant. Loamy soils are characterised by high adhesive strength, which can lead to increased resistance during pile driving.
Moisture content of the soil:
Soil moisture also plays an important role in the piling process. Moist soil increases the resistance of the pile, while dry soil offers less resistance. If the soil is too wet or muddy, it can be difficult to drive the pile as this leads to increased frictional resistance.
Soil conditions at depth:
Consideration of the soil conditions at depth is of great importance as they can often differ from the soil layers on the surface. It is possible that the upper soil layers may consist of loose material such as sand, while underneath there may be solid clay or even rock. These differences can lead to uneven driving and affect the stability of the pile.
Groundwater level:
The water table is another factor that affects the pile driving process. A high groundwater level increases the resistance when driving the piles. The presence of water can also loosen the soil and reduce the stability of the driven pile.
Type and dimensions of the pile:
The influence of soil conditions also depends greatly on the type of pile and its dimensions. Different pile materials such as wood, steel or concrete each have different mechanical properties and therefore react differently to different soil conditions. To ensure optimum load-bearing capacity and stability, it is important to select the right type of pile according to the soil conditions. The size of the pile also plays a role, as it influences the resistance and load-bearing capacity.
Soil investigation:
A comprehensive ground investigation prior to piling is essential to assess the ground conditions and identify any potential difficulties or risks. This investigation enables an informed decision to be made about the piling process to ensure optimum stability and longevity of the piles. Assessing the ground conditions allows appropriate precautions to be taken to overcome potential problems, e.g. by using specialised piling techniques, adapting the piling method or selecting suitable piling materials. A thorough ground investigation is an essential part of a successful piling operation and helps to identify potential problems at an early stage and find suitable solutions to ensure the stability and safety of the structure.
Included in the scope of delivery:
- 1 trolley case for storage
- 2 pile sleeves (Ø 70 mm and Ø 100 mm)
- Tool bag with tools
- Spare spark plug
- Grease for the gearbox
- Operating instructions
Operating instructions for: Pile driver "Skippy"
The operating instructions for the "Skippy" pile driver provide all the information you need to operate the machine safely and effectively. With an air-cooled 38cc 4-stroke EURO 5 petrol engine, the pile driver is capable of working piles up to a diameter of Ø 120 mm. The manual contains instructions on the correct handling of the fuel tank and the engine as well as information on the safe positioning of the pile driver during use. Careful use of the operating instructions will help to exploit the full potential of the machine while ensuring the safety of the user.
Exploded view for: Pile driver ‘Skippy’ motor
This exploded view shows the individual components in their relative position as they belong together when assembled. By visually separating the components, the structure of the object can be clearly understood, making it easier to identify individual parts.
Exploded view for: Pile driver ‘Skippy’ pile driver
This exploded view shows the individual components in their relative position as they belong together when assembled. By visually separating the components, the structure of the object can be clearly understood, making it easier to identify individual parts.
Frequently asked questions
Premium 19-piece HSS-Co8 bi-metal hole saw set
203,32 zł
241,95 zł
PREMIUM diamond core bit Ø 82 mm - length 450 mm
281,08 zł
334,49 zł
PREMIUM diamond core bit Ø 102 mm - length 450 mm
319,30 zł
379,97 zł
PCD / PCD sanding disc Ø 250 mm with 16 segments
789,98 zł
940,08 zł
Floor grinding machine BSM-250/E-PRO the original
3.804,71 zł
4.527,60 zł
71,48 zł
85,06 zł
71,48 zł
85,06 zł
71,48 zł
85,06 zł
71,48 zł
85,06 zł
71,48 zł
85,06 zł
Adapter plate Ø 250 mm
641,21 zł
763,04 zł
71,48 zł
85,06 zł
Adapter holder for diamond sanding pad Ø 100 mm
142,31 zł
169,35 zł
2.351,04 zł
2.797,74 zł
Available on 2024-10-14
TURBO diamond core bit Ø 32 mm - length 160 mm
89,09 zł
106,02 zł