Soft-impact core drill DKS-132/DC-H - currently the best core drill in its class
The DKS-132/DC-H diamond core drill is a versatile and powerful option for professional drilling work in various materials and offers additional safety functions for efficient and safe use.
The diamond core drill DKS-132/DC-H is a powerful tool for precise drilling in concrete, brick, stone and masonry in dry cutting. The power required for demanding tasks is provided by an output of 1500 watts at a voltage of 230 volts and an amperage of 10 amps. Despite its power, it is light and easy to handle with a weight of just 3.7 kg.
The device has two gears with idle speeds of 1500 and 3000 revolutions per minute to enable efficient adaptation to different materials. For dry drilling in concrete, a drilling diameter of up to 132 mm can be used in abrasive materials up to 202 mm. The impact frequency varies between 24000 and 48000 impacts per minute, depending on the selected gear.
The DKS-132/DC-H is equipped with an M18 spindle thread and has a grease gearbox, which improves the performance and service life of the device.
A special feature of this core drill is the soft impact function, which makes drilling easier. It can be activated or deactivated as required. When drilling particularly hard materials such as reinforced concrete, it is recommended to use the lower gear to reduce the speed.
The machine has a mechanical slip clutch that protects the operator and the device from excessive torque forces. This ensures safe and controlled use.
There are two LED indicators on the device that provide the operator with visual information on the current operating status and help to monitor the device. These indicators are characterised by red and yellow light.
Advantage of the brushless motor in our new series compared to conventional brush motors:
Power drop under high load: brushless motors are generally more efficient than brushed motors, especially under load. This means that brushless motors tend to maintain their performance better when facing heavy drilling tasks or demanding materials.
Torque at low speeds: Brushless motors can offer higher torque at low speeds than brushed motors. This is useful when you need extra torque when drilling into hard materials or when starting from a standstill.
Constant performance: Compared to brushed motors, whose performance can decrease over time due to brush wear, brushless motors maintain constant performance over a longer period of time.
Energy efficiency with variable loads: In variable load applications, where drilling tasks can vary in difficulty, brushless motors can optimise performance and save energy as they can dynamically adjust the load.
Less heating: Brushless motors generally heat up less than brushed motors, resulting in better performance consistency, especially in long-duration drilling applications.
Lower maintenance requirements: Brushless motors have fewer maintenance requirements compared to brushed motors. This is because they do not have brushes that wear out and need to be replaced regularly, as is the case with brushed motors. Less maintenance means less downtime and lower maintenance costs, which lowers the total cost of ownership and increases the availability of the core drill.
Reduced maintenance is a key benefit of brushless motors in core drills, as they provide reliable performance over longer periods of time without the need for frequent maintenance.
Included in the scope of delivery:
- Core drill DKS-132/DC-H
- 1 storage case for core drill
- 1 open-end spanner
- 1 M18 to M16 adapter with SDS plus centre drill bit holder
- 1 SDS plus centre drill bit
- 1 Operating instructions
Note:
The hoover is not included in the scope of delivery, but can be purchased in our shop.
Operating Instructions for: Diamond Core Drill DKS-132/DC-H
The diamond core drill DKS-132/DC-H is a powerful tool designed for precise and efficient drilling of core holes in various materials such as concrete, stone and masonry. These operating instructions are intended to give you an overview of the safe and proper use of the device.
Exploded view for: Diamond core drilling machine DKS-132/DC-H
This exploded view shows the individual components in their relative position as they belong together when assembled. By visually separating the components, the structure of the object can be clearly understood, making it easier to identify individual parts.
SWK/SWM quick-change system set for core drills
93,98 €
111,84 €
Dust extraction M18 inch to 1 1/4 inch UNC
92,53 €
110,11 €
112,41 €
133,77 €
41,99 €
49,97 €
Adapter M18 to 1 1/4 UNC
19,99 €
23,79 €
37,75 €
44,92 €
48,09 €
57,23 €
Centre drill for DKS-132/DC-H Ø 8 mm - length 160 mm
7,75 €
9,22 €
76,76 €
91,34 €
Wet and dry vacuum cleaner NTS-38/HEPA
767,92 €
913,82 €
28,85 €
34,33 €
1.176,39 €
1.399,90 €
838,75 €
998,11 €
1.260,49 €
1.499,98 €
729,15 €
867,69 €
1.360,59 €
1.619,10 €
1.260,49 €
1.499,98 €
474,75 €
564,95 €
1.799,89 €
2.141,87 €
1.176,93 €
1.400,55 €
838,75 €
998,11 €
729,15 €
867,69 €
Dust extraction M18 inch to 1 1/4 inch UNC
92,53 €
110,11 €
56,09 €
66,75 €
91,71 €
109,13 €
Case set 5 pcs. diamond core bits
173,59 €
206,57 €
41,99 €
49,97 €
41,85 €
49,80 €
37,75 €
44,92 €
Copper rings suitable for 1 1/4 UNC (5 pcs.)
9,90 €
11,78 €
Adapter M16 internal and external thread 50 mm
17,98 €
21,40 €
66,41 €
79,03 €
54,59 €
64,96 €
PREMIUM diamond core bit Ø 62 mm - length 450 mm
53,88 €
64,12 €
Plastic water tank WTK-10
60,96 €
72,54 €
PREMIUM diamond core bit Ø 82 mm - length 450 mm
65,75 €
78,24 €
85,96 €
102,29 €
Centre drill for DKS-132/DC-H Ø 8 mm - length 160 mm
7,75 €
9,22 €