Shaft seal set for the DKB-165/3SH core drill
The shaft seals have an inner diameter of Ø 25 mm and an outer diameter of Ø 48 / 50 mm and are designed for the DKB-165/3SH core drill.
Shaft seals are a crucial component in core drills, as they ensure that the moving parts of the motor are protected from dirt, dust and moisture. These seals are located at the point where the rotating shaft exits the motor and prevent oil, water or other liquids from entering the motor and causing damage.
Shaft seals are indispensable, especially for core drills, which are often used under extreme conditions such as high loads, dust and moisture. Without a functioning seal, the motor can quickly become defective.
If a seal is worn, leakages or unusual noises often occur during operation. Regularly checking the seals and replacing them in good time is important to avoid expensive repairs and extend the service life of the appliance.
Overall, seals are also a small but crucial component that ensures that core drilling equipment works reliably and for a long time, even under the toughest conditions.
2 carbon brushes for the DKB-165/3SH core drill
12,99 €
15,46 €
Shaft seal set for the DKB-132/2H core drill
14,99 €
17,84 €
Shaft seal set for the DKB-200/3SH core drill
15,99 €
19,03 €
PREMIUM diamond core bit Ø 92 mm - length 450 mm
64,61 €
76,89 €
TURBO diamond core bit Ø 132 mm - length 160 mm
54,30 €
64,62 €
82,51 €
98,19 €
PREMIUM diamond core bit Ø 500 mm - length 450 mm
539,51 €
642,02 €
PREMIUM diamond core bit Ø 162 mm - length 450 mm
139,99 €
166,59 €
Shaft seal set for the DKB-202/H-PRO or DKB-202/P-PRO core drill
16,49 €
19,62 €
Shaft seal set for the MKB-50HD magnetic drilling machine
14,99 €
17,84 €
TURBO diamond core bit Ø 162 mm - length 160 mm
69,95 €
83,24 €
104,36 €
124,19 €
PREMIUM diamond core bit Ø 137 mm - length 450 mm
130,95 €
155,83 €
PREMIUM diamond core bit Ø 82 mm - length 450 mm
65,75 €
78,24 €
TURBO diamond core bit Ø 32 mm - length 160 mm
20,84 €
24,80 €
151,51 €
180,30 €
PREMIUM diamond core bit Ø 112 mm - length 450 mm
79,73 €
94,88 €
91,71 €
109,13 €
76,76 €
91,34 €
Concrete dowel M14 x 55 mm - galvanised (20 pcs.)
19,15 €
22,79 €
2 carbon brushes for the DKB-165/3SH core drill
12,99 €
15,46 €
42,71 €
50,82 €
Diamond core bit Ø 162 mm with 8 TURBO segments
118,61 €
141,15 €
Diamond core bit Ø 82 mm with 5 TURBO segments
64,26 €
76,47 €
Diamond core bit Ø 132 mm with 6 TURBO segments
98,99 €
117,80 €
Diamond core bit Ø 57 mm with 4 TURBO segments
49,61 €
59,04 €
Diamond core bit Ø 112 mm with 5 TURBO segments
78,94 €
93,94 €
11,24 €
13,38 €
TURBO diamond core bit Ø 82 mm - length 160 mm
32,30 €
38,44 €