Shaft seal set for the DKB-165/3SH core drill
The shaft seals have an inner diameter of Ø 25 mm and an outer diameter of Ø 48 / 50 mm and are designed for the DKB-165/3SH core drill.
Shaft seals are a crucial component in core drills, as they ensure that the moving parts of the motor are protected from dirt, dust and moisture. These seals are located at the point where the rotating shaft exits the motor and prevent oil, water or other liquids from entering the motor and causing damage.
Shaft seals are indispensable, especially for core drills, which are often used under extreme conditions such as high loads, dust and moisture. Without a functioning seal, the motor can quickly become defective.
If a seal is worn, leakages or unusual noises often occur during operation. Regularly checking the seals and replacing them in good time is important to avoid expensive repairs and extend the service life of the appliance.
Overall, seals are also a small but crucial component that ensures that core drilling equipment works reliably and for a long time, even under the toughest conditions.
2 carbon brushes for the DKB-165/3SH core drill
55,41 zł
65,94 zł
Shaft seal set for the DKB-132/2H core drill
63,94 zł
76,09 zł
Shaft seal set for the DKB-200/3SH core drill
68,21 zł
81,17 zł
PREMIUM diamond core bit Ø 162 mm - length 450 mm
597,17 zł
710,63 zł
PREMIUM diamond core bit Ø 92 mm - length 450 mm
275,61 zł
327,98 zł
PREMIUM diamond core bit Ø 500 mm - length 450 mm
2.301,44 zł
2.738,71 zł
Shaft seal set for the MKB-50HD magnetic drilling machine
63,94 zł
76,09 zł
PREMIUM diamond core bit Ø 112 mm - length 450 mm
340,11 zł
404,73 zł
445,18 zł
529,76 zł
TURBO diamond core bit Ø 132 mm - length 160 mm
231,63 zł
275,64 zł
327,44 zł
389,65 zł
Shaft seal set for the DKB-202/H-PRO or DKB-202/P-PRO core drill
70,34 zł
83,70 zł
TURBO diamond core bit Ø 162 mm - length 160 mm
298,39 zł
355,08 zł
TURBO diamond core bit Ø 32 mm - length 160 mm
88,90 zł
105,79 zł
PREMIUM diamond core bit Ø 137 mm - length 450 mm
558,61 zł
664,75 zł
PREMIUM diamond core bit Ø 82 mm - length 450 mm
280,48 zł
333,77 zł
391,22 zł
465,55 zł
351,97 zł
418,84 zł
646,31 zł
769,11 zł
Concrete dowel M14 x 55 mm - galvanised (20 pcs.)
81,69 zł
97,21 zł
2 carbon brushes for the DKB-165/3SH core drill
55,41 zł
65,94 zł
182,19 zł
216,81 zł
Diamond core bit Ø 162 mm with 8 TURBO segments
505,97 zł
602,10 zł
Diamond core bit Ø 82 mm with 5 TURBO segments
274,12 zł
326,20 zł
Diamond core bit Ø 132 mm with 6 TURBO segments
422,27 zł
502,50 zł
Diamond core bit Ø 57 mm with 4 TURBO segments
211,63 zł
251,84 zł
Diamond core bit Ø 112 mm with 5 TURBO segments
336,74 zł
400,72 zł
47,95 zł
57,06 zł
TURBO diamond core bit Ø 82 mm - length 160 mm
137,79 zł
163,97 zł