M12 corded threaded rod with BFS-PRO disc wing nut for core drill rigs
The M12 x 16.8 mm corded threaded rod with a length of 175 mm is an important fastening accessory for core drill rigs. It is used to securely and stably fasten the core drill rig. This specific variant of the corded threaded rod is equipped with a large nut and a washer, which increase the stability and security of the fastening.
The fastening set for core drill rigs
In order to securely fix a core drill rig with the fastening set, care must be taken to ensure that an M12 fastening plug (not included in the scope of delivery) is securely and firmly anchored in the substrate. The corded threaded rod is mounted vertically at right angles to the core drill rig so that the washer and nut are in full contact with the base of the core drill rig. To tighten the nut, use a ring spanner or open-end spanner with a spanner size of SW27.
The load-bearing capacity of the connection depends on the size and length of the threaded rod and the condition of the concrete or masonry surface. It is therefore crucial to carefully plan the specific requirements of each application and select the appropriate fasteners to ensure a stable and secure fastening.
Important: In the event of deformation and visible damage, replace the fixing set immediately.
Core drill rig KBS-352/XL-PRO for core drills
1.859,90 €
2.213,28 €
Stainless steel heavy-duty anchor M12 x 100 mm - 1 piece
1,69 €
2,01 €
Stainless steel heavy-duty anchor M10 x 100 mm - 300 pieces
369,44 €
439,63 €
Stainless steel heavy-duty anchor M10 x 100 mm - 50 pieces
67,73 €
80,60 €
108,72 €
129,38 €
Stainless steel heavy-duty anchor M12 x 100 mm - 40 pieces
61,45 €
73,13 €
Cord threaded rod 200 mm M12
24,42 €
29,06 €
93,19 €
110,90 €
Cord threaded rod 220 mm with concrete thread
42,68 €
50,79 €
105,62 €
125,69 €
Concrete dowel M14 x 55 mm - galvanised (20 pcs.)
19,15 €
22,79 €
Corded threaded rod 270 mm with concrete thread
45,72 €
54,41 €
Stainless steel heavy-duty anchor M10 x 100 mm 1 piece
1,49 €
1,77 €
Concrete dowel M12 x 45 mm - galvanised (20 pcs.)
14,15 €
16,84 €
Stainless steel heavy-duty anchor M12 x 100 mm - 240 pieces
335,20 €
398,89 €
1.208,30 €
1.437,88 €
Cord-Fix nut L with 200 mm threaded cord rod M12
74,55 €
88,71 €
Setting tool with hand guard
30,48 €
36,27 €
PREMIUM diamond core bit Ø 127 mm - length 450 mm
98,27 €
116,94 €
PREMIUM diamond core bit Ø 57 mm - length 450 mm
50,35 €
59,92 €
79,79 €
94,95 €
Plastic water tank WTK-16
76,21 €
90,69 €
PREMIUM diamond core bit Ø 82 mm - length 450 mm
65,75 €
78,24 €
Copper rings suitable for 1 1/4 UNC (5 pcs.)
9,90 €
11,78 €
PREMIUM diamond core bit Ø 102 mm - length 450 mm
74,69 €
88,88 €
54,59 €
64,96 €
PREMIUM diamond core bit Ø 202 mm - length 450 mm
189,99 €
226,09 €
2.016,79 €
2.399,98 €
Cord-Fix nut L with 200 mm threaded cord rod M12
74,55 €
88,71 €
Concrete dowel M12 x 45 mm - galvanised (20 pcs.)
14,15 €
16,84 €
PREMIUM diamond core bit Ø 72 mm - length 450 mm
60,48 €
71,97 €
769,99 €
916,29 €
PREMIUM diamond core bit Ø 112 mm - length 450 mm
79,73 €
94,88 €