Diamond grinding disc Ø 250 mm for hard floors
Available between 20.01. and 22.01.
| Diameter: | 250 mm |
|---|---|
| Grain size: | 30 |
| Produkttyp: | Diamantschleifteller |
| Modell: | Diamantschleifteller für harte Böden |
| Einsatzbereich: | Nass- und Trockenschliff |
| Anwendungsbereich: | C50 Beton |
| Höhe: | 20 mm |
| Gewicht: | 3,5 kg |
| Kompatibel mit: | BSM-250/E-PRO & BSM-250/Xtrem |
| Segmentanzahl: | 20 Premium Segmente |
| Segmenthöhe: | 10 mm |
| Segmentlänge: | 40 mm |
| Segmentbreite: | 10 mm |
Description
Diamond grinding disc Ø 250 mm for hard floors with grit #30
A diamond grinding disc for hard floors is a high-quality grinding disc designed for working on hard concrete. This sanding disc is set with industrial diamonds, which are perfect for working on hard materials thanks to their extreme hardness and abrasion resistance. The grinding disc can be fitted to all floor grinders with a working width of 250 mm. By rotating at high speed, the surface is removed evenly. Thanks to the specific design, our sanding disc has very good sanding performance and a long service life.
Advantages
- Fast material removal: The hard diamond sanding discs offer fast and efficient material removal, which significantly reduces working time and increases efficiency.
- Optimum adaptation to hard floors: These sanding discs are specially designed for hard concrete floors up to a compressive strength class of C50 and ensure effective processing.
- Even surface: They ensure an even surface that is ideally prepared for subsequent grinding and polishing work.
- Gentle processing: The hard diamond grinding discs minimise the risk of damage to the hard material as they adapt perfectly to the nature of the substrate.
- Durability : Thanks to their high abrasion resistance and special design, these sanding discs offer a long service life compared to conventional abrasives.
- Cost savings: Thanks to their efficient operation and extended service life, hard diamond sanding discs can save costs in the long term.
- More effective dust extraction: Thanks to the open design of the sanding disc, dust can be extracted much more effectively using a dry vacuum cleaner.
Technical data
- Concrete sanding disc with 20 segments
- for floor grinder with 19 mm mounting hole
- Dimensions per segment: 40x10x10 mm
- Sanding width: 250 mm
- for wet and dry sanding
- Flat design
- extremely clean sanding pattern
- Easier work as no pressure is required on the machine
- grit size 30
It is important to measure and know the concrete hardness before use in order to select the correct diamond grinding disc. Our grinding discs with a grit size of 30 are suitable for general use. Depending on the hardness of the concrete, you can choose between sanding discs for soft, medium-hard or hard floors. The diamond sanding disc for hard floors is the right choice for concrete floors with a compressive strength class of up to C50. This sanding disc has been specially developed for coarse sanding of hard floors. This sanding disc is designed to remove large amounts of material quickly and efficiently to produce a rough but even surface that is ready for further processing steps. After sanding with sanding discs, you can choose from our range of diamond sanding pads. There you will find sanding pads ranging from a grit size of 50 to 1500, with which you can fine sand step by step to a polished surface.
Classification
Concrete is classified according to its compressive strength. Up to a compressive strength class of C50/60, it is hard concrete. Compressive strength class C40 is medium-hard concrete and C30 is soft concrete. This classification helps when selecting the right diamond grinding disc, as different types of concrete place different demands on the grinding tool.
The grinding disc is suitable for the following machines
- BSM-250/E-PRO & BSM-250/Xtrem core drills
- Blastrac single disc grinders, e.g. BGS-250, BG-250E, BG-250
- Norton Clipper CG252
- Profitech PTT-BS 250
- Dr Schulze DBS 250
- Gölz SM 250
- MSW-FG-250
- Husqvarna BG 250
- FGSR 2503
Properties
| Diameter: | 250 mm |
|---|---|
| Grain size: | 30 |
| Produkttyp: | Diamantschleifteller |
| Modell: | Diamantschleifteller für harte Böden |
| Einsatzbereich: | Nass- und Trockenschliff |
| Anwendungsbereich: | C50 Beton |
| Höhe: | 20 mm |
| Gewicht: | 3,5 kg |
| Kompatibel mit: | BSM-250/E-PRO & BSM-250/Xtrem |
| Segmentanzahl: | 20 Premium Segmente |
| Segmenthöhe: | 10 mm |
| Segmentlänge: | 40 mm |
| Segmentbreite: | 10 mm |
Video
1Reviews 0
Login
Customers also bought
€79.99
